Installation guide

Web-based User Interface
BeoLink Gateway contains a web-based User Interface - as in a router. This means that the user interface can be
accessed by using the Internet browser on the PC. All configuration of BeoLink Gateway is done by means of the
web-based User Interface.
The browser must be, for instance Google Chrome, IE 10, Safari with Bonjour or a similar browser.
Navigation
The User Interface contains different menus, which can be selected in a navigation bar. It is recommended not to
use the back and forward navigation buttons in the browser because information entered may be lost.
Save settings
Auto saving at least every 20
th
minute if there is a low or no programming activity. At a higher programming
activity auto saving will be performed with shorter intervals.
The ‘Save’, 'Add' or ‘Apply’ buttons in a specific menu should always be used, before leaving the menu, as
changing to another menu will not save the settings made.
Help function
The Help function, which contains all help items can be accessed with the ‘Help’ button and a ‘Table of Contents’
button.
All menus in the web-based User Interface have a link to the Help-function. When the link is activated the current
window with the menu is replaced and the relevant part of the help function is shown.
To avoid the window with the menu to be replaced right-click on ‘Help’ and select ‘Open another tab’.
14