Installation guide

Setting up ML Gateway 16
Software update
There are two methods for updating ML Gateway software. One for Internet access and one for no Internet access:
Internet access
When ML Gateway is congured to have Internet access, it provides the opportunity to check for new software on-line and download the most
recent version.
- Click on the Tools tab and choose Software Update. Use the Check available software on-
line button to check for the latest available software. The online version will be displayed
together with the currently running version. Internet access of ML Gateway requires two
conditions:
- The installation network has direct access to Internet (no proxies).
- The network settings for ML Gateway are correctly set up.
If the network has a DHCP server, connect via DHCP in order to get all these settings automatically. You can revert to static IP address later if
needed, while keeping the other settings provided by the DHCP server. Most DSL routers nowadays are DHCP servers by default.
- Select the Update from on-line version... button to download and install the new software.
No Internet access
If ML Gateway has no direct Internet access, it is possible to upload and install a software image le from a location stored on your computer.
- Navigate to the Load new software.. section and click Browse... . When the navigation box
appears, choose the destination and software le. Click Update software.
! Do not switch off ML Gateway during the installation of new software, as this may
result in a corrupted system.