User Manual

37
Change volume, bass treble or
balance
To adjust sound, bring up the Sound menu.
Temporary settings are cancelled when you
switch off the television.
To change volume, bass, treble or balance…
> Press MENU to bring up the main menu.
> Press
3 to bring up the Setup menu.
> Press
2 to bring up the Sound* menu.
> Press GO to bring up the Adjustment menu.
> Press
l or n to move between menu items.
> Press
m or p to adjust the settings for each
item.
> Press EXIT to store your settings until you
switch off the television, or…
> …press GO to store your settings permanently.
The appearance of the ‘Sound’ menu depends on
if your television is equipped with the optional
surround sound module and how many speakers
are connected.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Sound system
Counter Tape Speed PDC&VPS Marker
Time used 240 SP On On
Volume Bass Treble Loudness
32 0 0 On
*NOTE! If your television is equipped with the
optional surround sound module, the Sound
menu lets you calibrate your surround sound
speaker setup permanently. For further information,
refer to the chapter ‘Loudspeaker connections –
surround sound’ on the CD-rom.