User`s guide

16
You can let the radio find the
available radio stations for you,
and then store them on a program
number of your own choice.
You can also tune the radio manually
and find specific stations yourself.
To tune in stations, the frequency
must be shown in the display.
Any stored radio station can be
deleted again.
Tune in radio stations
Search tuning
During search tuning all available stations
producing an acceptable signal are found.
However, this may include empty channels
which should not be stored.
Manual tuning
When search tuning does not produce a
specific radio station, you can perform manual
tuning to store the specific station.
Press RADIO to switch on the
radio
Press
ss or tt to see the
frequency in the display
Press
ss or tt again to start the
search tuning function
During tuning, the frequency is
shown in the display
Press STORE when the requested
station is found
The first available program
number will blink in the display
Press
ss or tt to change the
program number, if you like
Press STORE to store the station
on the displayed program
number
Press
ss or tt twice to resume
search tuning and repeat the
procedure when the station you
want is found
RADIO
ss tt
92.3
ss tt
92.8
STORE
Pr12
ss tt
STORE
ss tt
Press RADIO to switch on the
radio
Press ss or tt to see the fre-
quency in the display
Press again to start the search
tuning function
During tuning, the frequency is
shown in the display
Press STOP during search tuning
to perform manual tuning
Keep
ss or tt pressed down to
tune up or down the frequency
band
The frequency is shown in the
display and the last digit is
blinking
Press STORE when the requested
station is found
The first available program
number is displayed
Press
ss or tt to change the
program number, if you like
Press STORE to store the radio
station on the displayed
program number
RADIO
ss tt
92.3
ss tt
92.8
STOP
ss tt
92.9
STORE
Pr 4
ss tt
STORE
Note: If you do not wish to store a found station,
you resume search tuning by pressing
ss or tt .
NOTE! When performing search tuning in areas
with many empty channels in the frequency
band, it might be an advantage not to extend
the built-in aerial, BeoSound 1 will then skip
most empty or weak channels.