User Guide User guide

>> Customise Beo4 …
Congure Beo4 for use with another audio
or video system
YourBeo4isconguredforVIDEO4fromthe
factory,butyoucancongureBeo4foruse
withanytypeofBang&Olufsenaudioor
videosystem.
To be able to recongure Beo4 …
> Press and hold the standby button down.
> Press LIST to get access to the Beo4 setup
function.
> Let go of both buttons. ADD? appears in the
display.
> Press LIST repeatedly to display CONFIG? on
Beo4.
> Press GO to be able to select the type of
conguration – video or audio.
> Press LIST until VIDEO? or AUDIO? appears in
the display.
> Press GO to get access to video or audio
congurations.
> Press LIST until the conguration you want
appears in the display.
Or, press any of the control buttons,
, ,
or to move forwards or backwards in the
list of available congurations.
> Press GO to store the conguration shown in
the display.
When STORED appears in the display, the
conguration has been changed and you then
leave the Beo4 setup automatically …
14