User's Manual

Hint: the reader generates a magnetic field with the frequency of 13.56MHz which is
influenced by any electrically conductive material in close proximity to the antenna. A
minimum of 10 cm is required to ensure that there will be no significant degradation of the
performance in terms of read range and reliability.
Specifications
Dimensions:
– Length: 252 mm
– Width: 112 mm
– Height: 80 mm
Host interface: USB via virtual COM-Port , 115200 baud, 8N1
Power supply: 5VDC, +-5%
Current consumption: Idle (typ.): 70mA
Barcode scanner on (typ.): 135mA
RF field on (typ.): 160mA
max: 500mA
Operating temperature range: +5..+45° C
Storage temperature range: -20°C..+70°C
Thermal shock: 30°C/min maximum dT/dt
Relative humidity: 5% .. 95% (not condensing)
Weight: 310g
Accessories:
– USB Cable
– AC/DC Adapter Input: 100-240V AC
Output: 5V DC / 1.0A
Caution: only the original wall adapter should be used to ensure full operation.
RF Characteristics:
– Operating frequency: 13.56 Mhz
– Data transmission modulation reader to card: AM
– Data transmission modulation card to reader: AM/load modulation
General regulatory requirements
FCC:
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Class 1 Laser: