Operation Manual

Operational Manual
Rev: 02
Date: 2022-05-16
2
The “10090-XYZ” Reader/Writer is a desktop contactless smart card USB &
Bluetooth wireless Technology Smart card reader and writer combining the high- and low frequency
card technologies. It supports Mifare, ISO 14443A/B and ISO 15693 standards as well as all major
125kHz-based transponders.
Based on BALTECH’s core technology it provides support of the latest smartcard technologies,
encryption and security features.
Mounting and Connection
The reader generates magnetic field at 13.56MHz, 125 KHz and 2.4 GHz which could be influenced by
any electrically conductive material close to the device.
To ensure good performances and functionalities in terms of read range and reliability a minimum
distance of 10cm from such materials is required. Mounting the unit directly to metal would result in
a severe reduction of read range down to zero functionality. Care should be taken when testing the
device after mounting at a problematic environment: Read ranges and performance vary from card
to card and very much from card to tag or key-fob.
When mounting multiple readers, the distance between readers should be minimum 0.5 m in order
to avoid degradation of performance due to interference.
To connect the device to a host system (a printer or a PC), please make sure that the system provides
an USB socket intended for connection of the reader.
Operation
Whenever the device is connected to a proper power supply, it will switch on the internal antenna
and periodically scan for a card. Once a card has been detected, the card number is read, the data
converted and sent to the host system through the USB Interface. To enable the device to read cards,
tags and key-fobs successfully, they should be placed centred above the reader.