23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 12345678901234567890123456789012123456
WOW Instructor Teacher’s Desk II Part Drawing Description Part Qty Drawing Description Qty Hardware List A1 P1 Table Top A2 1 EA A3 B P2 File Cabinet P4 Left Leg Assembly Right Leg Assembly Center Panel Assembly 10 EA 2 EA 1 EA D Locking Caster-File 2 EA E Non-Locking Caster-File F Divider Panel 1 EA Pencil Tray 1 EA Keys 2 EA 1 EA 2 EA 1 EA 1 EA I Top Support Bar Short Screw 1/4X12mm 5 EA 3” Non-Locking Caster H P6 Screw M6X20mm 1 EA G P5 4 EA 3” Locking Caster
Assembly Diagram READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. 1.) Identify and Separate all the Parts and Hardware. 2.) Attach the Left Leg Assembly (P3) to the bottom of the Top Panel (P1) using two Screws (A1) as shown in Illustration #1. Screw in two Locking Casters (B) into the bottom of the Left Leg Assembly. Tighten casters with Caster Wrench (J). Illustration # 1 P1 A1 B P3 J 3.
.) Attach the Right Leg Assembly (P4) to the Table Top (P1) using two Screws (A1). Attach the Right Leg Assembly (P4) to the Center Panel Assembly (P5) using two Short Screws (A3) as shown in Illustration #3. Screw in a Non-Locking Caster (C) into the bottom of the Right Leg assembly and tighten with Caster Wrench (J). P1 Illustration # 3 A1 P4 A3 C P5 5.) Position the File Cabinet (P2) over the mounting holes in the bottom of Table Top (P1).
6.) Attach Top Support Bar (P6) to the File Cabinet (P2) using two Short Screws (A3) and to the Left Leg Assembly (P3) using two Short Screws (A3) as shown in Illustration #5. Illustration # 5 P2 P6 A3 P3 A3 8.) Attach two Locking Casters-File(D) to the front and two Non-Locking Casters -File(E) on the bottom of the File Cabinet (P2) using one Caster Screw-File(K) to secure in place. Make sure the Casters are attached as shown in IIllustration #6.
8.) Attach two Locking Casters-File(D) to the front and two Non-Locking Casters -File(E) on the bottom of the File Cabinet (P2) using one Caster Screw-File(K) to secure in place. Make sure the Casters are attached as shown in IIllustration #7. E K D P2 Illustration #7 9.) Turn the Desk upright. Place drawer Divider Panel (F) and Pencil Tray (G) in the top File Cabinet (P2) drawer. See illustration #8.
Instructors Teacher’s Desk II 23 7/16” 60 3/16” 29 1/2” 42 1/2” 90590, 90591_7-17-14 7
