Manualshelf

Quick-Start Guide

ManualsBrandsBalt ManualsComputersOui Reception & Lobby End Table
123
2
Part Drawing Description Qty
Oui Reception Tables- End and Cocktail
P1
P2 Top Support Tube 2 EA
Leg 2 EA
P3 Top Panel 1 EA
Part Drawing Description Qty
A Screw 1/4-20 X 15mm 10 EA
B Allen Wrench 1 EA
Identify and Separate all the Parts and Hardware.
1.)
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
2.)
Place Top Panel (P3) face down on a padded surface.
3.) Attach a Leg (P1) to each side set of embedded threaded inserts in the bottom of the Top Panel
(P3) using three Screws (A). Repeat this Step to attach the second Leg (P1) to the opposite
side as shown in illustration #1. Leave the Screws loose.
4.) Insert a Top Support Tube (P2) in between each leg. Line up the holes and attach using two
Screws (A). Repeat this Step to attach the second Top Support tube as shown in illustration #2.
Tighten all Screws with Allen Wrench (B).
illustration #1
illustration #2
A
P1
P1
P2
P2
P3
A
A