Quick-Start Guide

3
#89868 Single Floor Carrel
Assembly Diagram
To Assemble:
Identify and Separate all the Parts and Hardware.
Illustration # 1
D
Place the Left Leg (P-6) and Right Leg (P-7 ) with the three threaded holes facing up.
Install 5 Cam Posts (D) in each Leg as shown in illustration # 1.
Install 1 Leveling Glide (G) in the bottom of each leg as shown in illustration # 1.
Tighten Cam Posts (D) using Phillips Screwdriver.
D
P-7
1.
2.
3.
P-6
D
E
E
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
Should you require assistance during assembly,
please call our Customer Service Department
Monday - Friday 8 a.m. - 5 p.m.
Central Standard Time
Toll-Free Customer Service
1-800-749-2258
4.