23456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 12345678901234567890123456789012123456789012345678901234
WOW AV Cart w/Adjustable Height Shelf Presentation Cart Part Drawing Description Qty Part P-9 P1 Leg Assembly Right Leg Assembly Left Description Right Shelf Bracket 1 EA Left Shelf Bracket 1 EA 1 EA Optional Electrical Outlet W/Cord Winder P3 LCD Platform Qty 1 EA P-10 P2 Drawing 1 EA 1 EA Hardware List P4 P5 P6 Laptop Shelf Lower Shelf Middle Shelf A 9/16”Socket Screw 20 EA B 2-1/2” Socket Screw 4 EA C Square Nut 4 EA D 3” Locking Caster 2 EA E 3” Caster 2 EA E
Presentation Cart Assembly Diagram READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. 1.) Identify and Separate all the Parts and Hardware. 2.) Place the LCD Platform (P-3) with the insert nuts facing up. Attach 1 Right Leg Assembly (P-1) and 1 Left Leg Assembly (P-2) using 4 each (A) screws. (Finger tighten only) Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m.
.) Align 4 each Angle Brackets (P-8) with the edge of the Middle Shelf (P-6) and attach using 4 each (A) Screws as shown in illustration #2. (Finger tighten only) Illustration # 2 A A P-8 P-8 A P-6 5.) Attach Right Shelf Bracket (P-9) and Left Shelf Bracket (P-10) to Laptop Shelf (P-4) using 4 Flat Head screws (A) as shown in illustration # 4.
Illustration # 4 6.) Attach Lower Shelf (P-5) to the Right & Left Leg Assemblies (P1 & P2) using 4 each (B) screws as shown in illustration # 4. (Finger tighten only) B B P-5 7.) Attach 2 Locking Casters (D) to the front, and 2 Casters (E) to the back of the unit. Tighten all Casters using Caster Wrench (G). P-1 A P-2 C P-6 C 8.
10.)To install Grommets (E) in LCD Platform (P-3) and Middle Shelf (P-6), separate parts and press Grommet Sleeve in rectangular openings as shown in illustration # 5. 11.) Snap 2 plastic Caps over top of Sleeve as shown in illustration # 5. Cap P-3 Cap E Grommet(E) installation Illustration # 5 Sleeve E P-6 Grommet (E) Cap Cap Sleeve Important The Balt product you have purchased is guaranteed against material and workmanship defects. This guarantee extends 1 year from date of purchase.
Optional Electric Outlet Parts/Hardware List Assembly Diagram This Electrical Outlet is Part # 66450 and must be purchased separately Please contact our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258 EL-1 Electric Outlet 1 EA EL-2 Metal Bracket w/Cord Winder 1 EA EL-3 Phillips Head Screw 2 EA EL-4 Hex Nut 2 EA 1.) Identify and Separate all the Parts and Hardware. 2.) Slide Metal Bracket over the Electrical Outlet (EL-1) as shown.
#89759 Presentation Cart Sit-down/Stand-Up AV Workstation For more information 1-800-749-2258 18 X 14 18 X 16 18 #66450 Optional Electrical Outlet Adjustable Height 19 - 39-½ Middle Shelf 9½ X 16 18 X 18 40” 24 17 Shipping Information 0.2 Cubic Feet 4.0 lbs. Shipping Information 2.8 Cubic Feet 44 lbs.
