Quick-Start Guide

3
Split Level 72 Task Table
Assembly Diagram
P-1
Identify and Separate all the Parts
and Hardware.
Place the Monitor Platform (P1) with the
insert nuts facing up. Attach 1 each
Upper Insert (P3) and 1 each Upper Insert
(P4) using 4 each (B) screws.
(Finger tighten only)
Illustration # 1
Illustration # 2
B
Attach Stability Panel (P5) to the
Upper Inserts (P3 & P4) using 4
Screws ( A) as shown in
illustration #2.
P3
P1
A
1.)
2.)
4.)
Attach Crossbrace (P6)
between the Upper Inserts
(P3 & P4) using 2 Screws (A1)
as shown in illustration #1.
3.)
A1
B
P3
P4
P5
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
P4
P6