23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 12345678901234567890123456789012123456
#34444 Optional Shelf - Xtra Wide-Presentation Cart Part Drawing P-1 Description Side Shelf P-2 Left Shelf Bracket Drawing Description Qty Hardware List 1 EA Right Shelf Bracket P-3 Part Qty A M6X12mm Socket Screw 4 EA B Allen Wrench 1 EA 1 EA 1 EA We recommend that you assemble this unit on a table. READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. 1.) Identify and Separate all the Parts and Hardware. 2.
#34444 Optional Shelf for Xtra-Wide Presentation Cart 3.)Attach Side Shelf to the Left or Right Leg Assembly of Xtra-wide Presentation Cart #27517 at the desired height as shown in illustration # 2. 4.) Attach Right Shelf Bracket (P-2) and Left Shelf Bracket (P-3) to the Left or Right Leg Assembly of Xtra-wide Presentation Cart #27517 at the desired height as shown in illustration # 2. (Tighten 4 screws under Side Shelf (P-1) using Allen Wrench (B)). Do not use unless all screws are tight.
