23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 R 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234
ECO-Wheasel Part P-1 P-2 P-3 P-4 Drawing Description R Foldable Easel on Wheels Qty Leg (wide) Leg (narrow) Side Hinge Board Tray 1 EA 1 EA 2 EA Marker Board (wide leg) P-6 Marker Board (narrow leg) 1 EA Optional Top Shelf (sold separatly) A 2” Socket Screw 2 EA B 1 1/4” Socket Screw 4 EA C 5/8” Socket Screw 8 EA D Screw Post 8 EA E Flat Washer 6 EA F Lock Nut 6 EA G 2” Locking Caster 4 EA H Allen Wrench 2 EA I Caster Wrench 1 EA 2 EA P-5 P-7 Hardware List
ECO-Wheasel 786/786-OT R Assembly Instructions E A A READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. P-2 F To Assemble: P-1 1. Identify and Separate all the Parts and Hardware. Illustration # 1 2. Assemble Legs (P-1) and (P-2) at the top by using 2” Socket Screws (A). Place the Flat Washer (E) in between the legs and tighten the Lock Nut (F) by holding with Adjustable Crescent Wrench and P-1 rotating the Socket Screw (A) with Allen Wrench (H).
P-5 D 5. Assemble Marker Board (P-5) by inserting 5/8” Socket Screw (C) through the Marker Board (P-5) and through the Board Tray (P-4). Insert board and tray through the Leg (P-1). Use the Screw Post (D) from the back of the Leg ((P-1) and tighten by using Allen Wrenches (H). See illustrations # 4. C D P-2 P-4 D P-1 C P-6 Illustration # 4 P-4 C P-2 D 6. Assemble Marker Board (P-6) by inserting 5/8” Socket Screw (C) through the Marker Board (P6), and Board Tray (P-4).
