23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 12345678901234567890123456789012123456
#27517 Xtra Wide Presentation Cart Part Drawing Description Part Qty P-11 P1 Leg Assembly Left P2 Leg Assembly Right 1 EA P3 Top Platform 1 EA P4 Laptop Shelf 1 EA Lower Shelf LCD Platform 1 EA P7 Stability Panel 2 EA P-9 P-10 Angle Bracket Right Shelf Bracket Left Shelf Bracket Description Qty CPU Sleeve 1 EA CPU Rod 2 EA Hardware List A M6X12mm Socket Screw 30 EA B Square Nut 4 EA C 4” Locking Caster 2 EA D 4” Caster 2 EA E Plastic Grommet 1 EA F Hex Nut 4
#27517 Xtra-Wide Presentation Cart Assembly Diagram READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. Illustration # 1 1.) Identify and Separate all the Parts and Hardware. 2.) Place the Left Leg (P-1) with the brackets facing up. Attach 2 Angle Brackets (P-8) using 2 Screws (A) and 2 Square Nuts (B). (Finger tighten only) B P8 P-1 P-1 A 3.) Place the Right Leg (P-2) with the brackets facing up. Attach 2 Angle Brackets (P-8) using 2 Screws (A) and 2 Square Nuts (B).
Illustration # 3 4.) Attach Top Platform (P-3) and Lower Shelf (P-5) to the Left & Right Leg Assemblies (P1 & P2) using 8 screws (A) as shown in illustration # 3. (Finger tighten only) P-1 P-5 A A Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258 P-2 A P-3 Grommet (E) P-10 Cap Cap A Sleeve Cap Sleeve P-6 E Grommet(E) installation Illustration # 4 Cap 5.
7.) Attach 2 Locking Casters (C) to the front, and 2 Casters (D) to the back of the unit. Tighten all Casters using Caster Wrench (K). Illustration # 5 F H G D C G P-1 8.) Place 1 Hex Nut (F) and 1 Flat Washer (G) on each CPU Rod (P-12). Insert 2 CPU Rods (P-12) through the Left Leg (P-1) or the Right Leg (P-2) as shown in illustration # 5. P-12 A F A 9.) Place 1 Black Plastic Spacer (H) over each CPU Rod (P-12) and secure each Rod with 1 P-11 Flat Washer (G) and 1 Hex Nut (F).
Illustration # 7 A P-10 P-4 12.) Attach Right Shelf Bracket (P-9) and Left Shelf Bracket (P-10) to Laptop Shelf (P-4) using 4 Flat Head screws (A) as shown in illustration # 7. (Finger tighten only) A P-9 13.)Attach Right Shelf Bracket (P-9) and Left Shelf Bracket (P-10) to the Right & Left Leg Assemblies (P1 & P2) at the desired height as P-1 shown in illustration # 8. (Tighten 4 screws under Laptop Shelf (P-4) using Allen Wrench (J)).