Quick-Start Guide

P-1 Leg Frame 2 EA
P-2 Back Stability Panel 1 EA
P-3 Long Metal Plates 2 EA
P-4 Short Metal Plates 4 EA
P-5 Forms Basket 1 EA
P-6 Forms Rack 1 EA
A Flat Head Screw 12 EA
A1 Square Shoulder Screw 4 EA
B Interior Threaded Post 4 EA
C Leveling Feet 4 EA
D 2” Locking Casters (for Front) 2 EA
E 2” Casters (for Back) 2 EA
F Allen Wrench 1 EA
G Caster Wrench 1 EA
H Cable Clips 4 EA
J Wing Nuts 8 EA
K Flat Washer 8 EA
Part Drawing Description Qty
Just Pure Magic Printer Stand JPM-1
Hardware List
Part Drawing Description Qty
Do not use unless all screws are tight. At least
every six months, check all screws to be sure they
are tight. If parts are missing,
broken, damaged, or worn, stop use of the product
until repairs are made by your dealer using factory
authorized parts.
P-1
P-2
E
D
B
To Assemble:
1. Identify and Separate all the Parts and
Hardware.
2. Attach Back Stability Panel (P-2) to 2
Leg Frames (P-1) using 4 Flat head
Screws (A) and 4 Interior Threaded Posts
(B) as shown in illustration # 1.
(Do not tighten the screws all the way)
3. Attach 4 Leveling feet (C) or Casters to
the Leg Frames [If casters, 2 Locking
casters (D) in the front and 2 Casters (E)
in the back. Tighten the Casters using
Caster Wrench (G)]
A
Illustration # 1