User's Manual

COBALT UHF-SERIES CHAPTER 6: ETHERNET/IP INTERFACE
PAGE 94 OF 140
ON DEMAND CONFIGURATION PAGE
The OnDemand Configuration Page allows you to modify the settings of the
Cobalt’s Node.
Figure 6-3: The OnDemand Configuration Page
3.
In the upper portion of the OnDemand Configuration Page, select a
PLC Type
from the drop-down menu.
4.
Enter the PLC’s IP address.
5.
For the
PLC Slot Number,
enter a value between 0 and 255. The PLC Slot
Number indicates the location in your PLC rack where the controller module is
installed (normally slot 0 for ControlLogix).