User's Manual

COBALT UHF-SERIES CHAPTER 6: ETHERNET/IP INTERFACE
PAGE 93 OF 140
6.5 ONDEMAND CONFIGURATION FOR ETHERNET/IP
Now that you have configured the Cobalt’s IP address, you will need to use the
embedded HTML Server to access the Cobalt’s OnDemand Configuration Page.
Through the use of the OnDemand Configuration Page, the Cobalt can be configured
to communicate with a ControlLogix PLC.
To configure the Cobalt’s OnDemand Configuration settings, follow the steps below:
1.
Open a Web browser on the host and enter the Cobalt’s new IP address in the
URL field. The HTML Server – Main Page will be displayed.
2.
At the HTML Server – Main Page, click the button labeled “
OnDemand Config
.”
The OnDemand Configuration Page will be displayed.