User's Manual

COBALT UHF-SERIES CHAPTER 6: ETHERNET/IP INTERFACE
PAGE 92 OF 140
4.
Click the button labeled “
EDIT
”, located below “
Network Settings.
”
The IP Configuration Page will be displayed.
IP
CONFIGURATION P AGE
The IP Configuration Page is used to modify and save changes to the IP Address,
Subnet Mask and (Network) Gateway IP Address.
Figure 6-2: The IP Configuration Page
5.
In the fields provided, enter your new IP configuration values for the Cobalt.
6.
Click the
“
Save Settings
” button to store your new IP configuration, then
cycle power to the UHF-CNTL to store the changes in the main memory. The
Ethernet module will reset and your IP changes will be implemented.
7.
After the Cobalt has restarted, verify the new IP configuration by opening a
Web browser and manually entering the Cobalt’s new IP address in the URL
field. If successful, you should arrive back at the HTML Server – Main Page.