User's Manual

COBALT UHF-SERIES CHAPTER 6: ETHERNET/IP INTERFACE
PAGE 91 OF 140
6.4 IP CONFIGURATION VIA HTML S ERVER
To configure the Cobalt for Ethernet communications, begin by assigning the
controller a locally compatible IP address.
Through a standard Web browser, you can utilize the Cobalt’s HTML Server to
access an embedded suite of controller configuration tools, called the “OnDemand
Utilities.” Among its features is the ability to modify and save changes to the
controller’s IP address, which is stored internally on the Cobalt.
Cobalt Industrial Ethernet RFID Controller - Default IP Address:
192.168.253.110
SETTING THE IP ADDRESS OF THE COBALT
To set the Cobalt’s IP address using the HTML Server, follow the steps below:
1.
Open a Web browser on the PC.
2.
In the URL address field, enter the Cobalt’s IP address (192.168.253.110 =
factory default).
3.
Press
ENTER
.
The HTML Server - Main Page will be displayed.
HTML
SERVER – MAIN P AGE
Figure 6-1: The HTML Server - Main Page
The HTML Server - Main Page lists the IP address and network settings currently
stored on the Cobalt.