User's Manual

COBALT UHF-SERIES CHAPTER 5: COMMAND PROTOCOLS
PAGE 65 OF 140
6 <Channel ID value>
7 <Channel ID value>
UHF Configuration Byte 9
This byte permits the user to
enable/disable the
Choose Nearest
One
property.
If the Choose Nearest One property is
disabled
, an error response is
generated whenever a single-tag
read/write command is executed in a
multi-tag environment.
If the Choose Nearest One property is
enabled
, the read/write command is
executed on the tag with the stronger
signal.
<Partially Reserved>
BIT Description
0
Reserved
*
1 <Choose Nearest One option>
2
Reserved
*
3
Reserved
*
4
Reserved
*
5
Reserved
*
6
Reserved
*
7
Reserved
*
Command Terminator
0x03
*Leave the default value retrieved through Command 0xC1: Get UHF Configuration
Response from Controller
PARAMETER FIELD CONTENT
Header
0x02, 0x02
Response Size
0x0001
Command Echo
0xC0
Terminator
0x03