User's Manual

COBALT UHF-SERIES CHAPTER 4: LED STATUS
PAGE 44 OF 140
4.1.3 LED Behavior for Cobalt UHF-CNTL-IND-02
The Cobalt UHF-IND RFID Controller has five LED indicators conveniently located
on the front of the device, that convey visual information to the operator.
LED FUNCTION DEF IP ACT IP PWR
Power On
RF
Activity
COM
Activity
LED COLOR
Amber Amber Green Red Green
LEDs Description
LED COLOR NAME LED DESCRIPTION
RED RF
The RF LED illuminates when RF power is being transmitted by
the antenna.
GREEN COM
The COM (communications) LED flashes ON and OFF when
data is being transmitted between the antenna and a tag.
When in Continuous Read mode, the COM LED will remain ON
and will turn OFF briefly only while data is being read from or
written to a tag.
GREEN PWR
The PWR (power) LED is ON whenever power is applied to the
Cobalt.
AMBER DEF IP
The DEF IP LED indicate the status of the IP address in the
unit. It illuminates when the IP address of the unit is the default
one: 192.168.253.110
AMBER ACT IP
The ACT IP LED indicate the status of the IP address in the
unit. It illuminates when the IP address of the unit is not the
default one, but one chosen by the user.
Table 4-3: UHF-CNTL-IND-02 - LEDs Description