User's Manual

COBALT UHF-SERIES CHAPTER 3: CONFIGURING THE COBALT
PAGE 37 OF 140
C
OBALT UHF CONFIGURATION EXAMPLE: UHF CONFIGURATION TAB
One of the five different tabs shown in the Dashboard’s main display is the UHF
Configuration Tab.
This tab contains two different sections: EPC Read/Write and UHF Configuration
Section. These sections provide configuration details and contains parameter options
related to the UHF controller’s specific features.
In the EPC Read/Write section, for instance, users can read and write the EPC
portion of the UHF tags and also do an inventory of the ECP codes of all the tags in
the field of the reader. Setting the Repeat option will make the Dashboard
continuously sending the same command.
The UHF Configuration section allows users to set configuration parameters which
are specific to the UHF controller, namely:

UHF Power, representing the RF power in mW emitted during the
communication with tags

RF Channel, a 2-bytes value in the range 0-9 representing the RF channel to
use (this has a meaning only on the EU frequency reader)