User's Manual

COBALT UHF-SERIES CHAPTER 2: INSTALLING THE COBALT UHF
PAGE 34 OF 140
2.4.2 UHF-CNTL-IND-02 Cabling Information
The UHF-CNTL-IND-02 includes:
 a 4-pin, female M12, D-code connector for Ethernet communication
 a 5-pin, male M12 connector for power.
These connectors are located on the bottom of the Controller’s housing.
Figure 2-8: UHF-CNTL-IND-02 Controller - Ethernet & Power Connectors
Table 2-4: Ethernet Connector - Pinout
PIN # DESCRIPTION
1
TX+
2
RX+
3
TX-
4
RX-