User's Manual

COBALT UHF-SERIES CHAPTER 2: INSTALLING THE COBALT UHF
PAGE 32 OF 140
2.4 INSTALLING THE UHF-CNTL-IND-02
The UHF-CNTL-IND-02 RFID Controller supports TCP/IP and Industrial Ethernet
communications. The UHF-CNTL-IND-02 can be connected to a LAN or
Programmable Logic Controller (PLC) via CAT5E Ethernet cabling or it can be
connected directly to a host computer by means of a standard Ethernet crossover
cable.
Figure 2-7: UHF-CNTL-IND-02 Communication Interfaces
TO ANTENNA
TO ETHERNET
NETWORK
TO MAINS