User's Manual

COBALT UHF-SERIES CHAPTER 2: INSTALLING THE COBALT UHF
PAGE 28 OF 140
RS232 SERIAL INTERFACE CABLE SCHEMATIC
If you intend to assemble your own RS232 serial interface cable, follow the schematic
below. Note that signals and electrical loads applied to Pin 6 (RX) and Pin 7 (TX)
should conform to RS232 specifications. For bulk RS232 cable, see Belden cable
P/N: 9941 (www.belden.com).
Figure 2-3: RS232 Serial Interface Cable – Schematic
CBL-1493: FIELD MOUNTABLE CONNECTOR
Figure 2-4: CBL-1493 Mountable Connector
The CBL-1493 field mountable connector is available for attaching the UHF-CNTL-
232-02 model to a host computer via bulk cable. See Appendix B: Cobalt Cables and
Accessories for more information regarding cables and connectors for the entire line
of Cobalt UHF RFID Controllers.