User's Manual

COBALT UHF-SERIES CHAPTER 1: GETTING STARTED
PAGE 20 OF 140
1.4.5 Connecting the Antenna to the Controller
The Cobalt UHF Antennas are connected to the top of the Cobalt UHF-Series RFID
Controller’s housing through a single coaxial cable.
Figure 1-6: Connecting the Antenna to the Controller
The Cobalt UHF antenna has one female, N-type connector located on its rear side.
The Cobalt UHF Controller has one TNC-Reverse female connector located on the
top of the Controller’s housing.