User's Manual

COBALT UHF-SERIES APPENDIX A: TECHNICAL SPECIFICATIONS
PAGE 133 OF 140
APPENDIX A:
TECHNICAL SPECIFICATIONS
COBALT UHF CONTROLLERS - TECHNICAL SPECIFICATIONS
ELECTRICAL
DC Input Voltage Range
12 – 30 VDC
Power
6.7 W (280 mA @24 VDC)
Reverse Polarity Protecti
on
Series Diode protection on DC power pins
Tolerable Ripple
100 mVpp
Over-current Protection
1 amp internal limit
RADIO
Transmitter
Frequency
902 to 928 MHz (FCC part 15)
865.600 to 867.600 (ETSI EN 302 208)
Output Power
Programmable in 8 steps
up to 500 mW conducted @ 5 V (27 dBm)
Antenna Connector Reverse TNC
Frequency Tolerance ±10 ppm over the entire temperature range
Number of Channels
10 channels
(compliant to ETSI EN 302 208)
50 hopping channels
(compliant to FCC part 15)
Air Interface
Standard Compliance EPC C1G2
COMMUNICATION
UHF-CNTL-232-02
Point-to-Point: RS232
Baudrate: 9.6 to 115 kbit/s data rate (configurable)
Data Bits: 8; Stop Bits: 1; Parity: none; Flow
control: none
UHF-CNTL-485-02
Multi-drop: Subnet16 (RS485)
UHF-CNTL-IND-02
Ethernet: Ethernet/IP, MODBUS TCP, TCP/IP