User's Manual

COBALT UHF-SERIES CHAPTER 8: STANDARD TCP/IP INTERFACE
PAGE 122 OF 140
8.2.1 Setting the IP Address of the Cobalt
To set the Cobalt’s IP address using the HTML Server, follow the steps below:
1.
Open a Web browser on the PC.
2.
In the URL address field, enter the Cobalt’s IP address (192.168.253.110 =
factory default).
3.
Press ENTER.
The HTML Server - Main Page will be displayed.
Figure 8-1: The HTML Server - Main Page
The HTML Server - Main Page lists the network settings (including the IP address)
currently stored on the Cobalt.
4.
Click the button labeled “
EDIT
”, located below “
Network Settings.
”
The IP Configuration Page will be displayed.