User's Manual

COBALT UHF-SERIES CHAPTER 7: MODBUS TCP INTERFACE
PAGE 114 OF 140
IP CONFIGURATION P AGE
The IP Configuration Page is used to modify and save changes to the IP Address,
Subnet Mask and (Network) Gateway IP Address.
Figure 7-2: The IP Configuration Page
5.
In the fields provided, enter your new IP configuration values for the Cobalt.
6.
Click the
“
Save Settings
” button to store your new IP configuration, then cycle
power to the UHF-CNTL to store the changes in the main memory. The Ethernet
module will reset and your IP changes will be implemented.
7.
After the Cobalt has restarted, verify the new IP configuration by opening a Web
browser and manually entering the Cobalt’s new IP address in the URL field. If
successful, you should arrive back at the HTML Server – Main Page.