User's Manual

CHAPTER 2: COBALT INSTALLATION
COBALT HF RFID CONTROLLERS OPERATOR’S MANUAL
P/N: 17-1320 REV 01 (03-06) PAGE 34 OF 116
HF-CNTL-232-01 DEFAULT COM PORT S ETTINGS
COM PORT PARAMETER DEFAULT SETTING
Baud
9600
*
Data Bits
8
Stop Bits
1
Parity
None
Handshaking
None
Table 2-4: HF-CNTL-232-01 Default COM Port Settings
* The Cobalt HF-CNTL-232-01 supports baud rates of 9600, 19.2k, 38.4k, 57.6k and
115.2k.
HF-CNTL-232-01 C
ABLING PART N UMBERS
x CBL-1478: (RS232 Cable, Female, DB9, 2.5mm DC Jack).
x CBL-1488-XX: (8-pin, Female M12 w/ Bare Wires).
x CBL-1491: (8-pin, Female M12 Right Angle Field Mountable Connector).
x CBL-1492-XX: (8-pin, Female M12 Right Angle, Bare Wires).
x CBL-1493: (8-pin, Female M12 Straight Field Mountable Connector).
x Recommended Bulk RS232 cable - Belden P/N: 9941.
(XX = Cable Length in Meters)