Operation Manual

16
Checklist for Pre-Heating Your Jars
Be sure to fill Inner Pot with water to fill line before adding the Rack
or the jars.
Jars, especially the smaller sizes, may float in the appliance during
the Pre-Heating process. This is normal.
After starting the Pre-Heating process, it will take about 12 minutes to
heat your jars but they will continue to stay warm in the Appliance for
up to 1 hour. Your recipe will guide you on when to start the Pre-Heating
process to ensure jars are hot before filling with hot food.
Use Jar Lifter (included) to remove hot jars
from Inner Pot.
Keep jars in Appliance, with Lid closed, to keep them hot until ready
to fill with prepared recipes. Close Lid, but do not lock, between filling
each jar in order to keep remaining jars hot in Appliance.
NOTE: Keep lid in the unlocked position when
opening and closing.
Be sure to not press the Start button on the touch-pad without
filling the required volume of warm water in the Inner Pot. For more
information, refer to your recipe or the Pre-Heating section above.
1. REMOVE Inner Pot from Appliance. Remove Rack; set aside.
Fill Inner Pot with warm tap water to fill line. Return Inner Pot
to Appliance. Place Rack back into Inner Pot. Place empty jars
onto Rack in Inner Pot. Set preserving Lids and bands aside in
your work space. Close and lock Appliance Lid.
2 . P R E S S Pre-Heat button, then press Start. The red Pre-Heating
light will illuminate and the Appliance will begin Pre-Heating your
jars. In the meantime, you can start making your recipe. Jars will
be Pre-Heated when the green Ready light is flashing. Keep jars in
Appliance, with Lid closed, until ready to fill with prepared recipe.
Pre-Heating Your Empty Jars
Be sure to add warm to hot tap water to fill line.
Quick Tip