Service manual

IM1035
1.2.5 Power Requirements
AC Models
120V 220V/240V
Voltage:
105-130 VRMS ±10% 220 or
240 VRMS ±10%
Frequency:
49-6lHz 49-6lHz
Power:
24
Watts Nominal 24
Watts Nominal
Fuse: 2A 2A
DC Models l2VDC
15VDC
Voltage: l2±0.2 VDC
15± 0.2 VDC
Ripple:
100 mV p-p for refresh synchronous with power freq.
10 mV p-p for refresh
non-synchronous with power freq.
Current: 750 rnA DC nominal 900rnA DC nominal
1.0 A DC maximum
1.5
A DC maximum
Fu~e:
2A 2A
MATING CONNECTORS REQUIREMENTS
Power (AC models only): 4-contact male connector shell (Mo1ex 03-06-1041)
with female contact (Molex 4529T).
Signal (and power for DC models): 10-contact board edge connector
(Refer to paragraph 1.2.1 for details.)
WARNING
ANY POWER TRANSFORMER MUST BE WELL
REMOVED FROM CRT AND/OR BE OF LOW
EXTERNAL FLUX FIELD DESIGN
1.3 MECHANICAL SPECIFICATIONS
Table 1-1 and figure 1-2 lists the mechanical specifications for the TV 50/90/120
Data monitor. For further information, contact our General Sales Offices. They are:
Addison, Illinois [phone]
Ocean,
New Jersey [phone]
Santa Clara, California [phone]
Upland,
California [phone]
1.4 ENVIRONMENTAL SPECIFICATIONS
Temperature (Ambient)
Humidity (Non-Condensing)
Altitude
1-4
OPERATING
RANGE
5 to 80%
Up to 10,000 ft/
3048m
STORAGE
RANGE
-40°C to 65°C
5 to 90%
. Up to 30,000 ft/
9144m