Service manual

IM1015
Certification of compiiance with radiation regulations is shown by a label
attached to each monitor. The user is responsible for labeling his product in
a similar fashion or in making the DHEW label easisly visible from the outside
of the enclosure. The regulations state that "This (certification) information
shall be provided in the form of a tag or label permanently affixed or inscribed
on such product so as to be legible and readily accessible to view when the
product is fully assembled for use .. -:" Each monitor is supplied with an extra
label attached to the CRT. The user will remove this label and use it as
stated above.
1.4.2 Power Requirements
The TD monitor is designed to operate and meet radiation requirements when
operated within the respective AC input power specifications. Radiation
testing is performed at the maximum specified input voltage for AC powered moni-
tors.
1.4.3 UL Requirements
The TD monitor is designed to meet:
UL standard 796, Printed Wiring Board
UL standard 478, Standard for Electronic Data Processing Units.
UL standard 114, Standard for Office Appliances.
1-3