Datasheet

9
Mounting the module
5 Mounting
Instruction book, IQAN-MD4
5 Mounting
Mounting the module
The IQAN module should be mounted according to the following instructions:
Dashboard or panel assembly
When installing in a dash or panel the recommended panel thickness is 1.0 - 3.5 mm.
Use M4 screws to attach the supplied steel clips..
Panel mounting the IQAN-MD4
Ball or tilt/swivel mount
The option to use ball mounting or tilt swivel mounting for display position flexibility
is made possible by using Parker’s aluminum bracket. Use M4 screws to attach the
aluminum bracket to the display The bracket will accept Southco or RAM™ mounts.
Adjustable mounting the IQAN-MD4
NOTICE
Select the screw length so that the thread engagement in the unit is 6-8 mm.
• Less engagement and the screw may not hold.
• More engagement and the housing may be damaged.