Instructions / Assembly

Contact us for assistance: [phone] | www.balkenehome.com
7
ASSEMBLY: SOFA BENCH
1
Locate the Backrest
B
and Seat Panel
A
. Place a
Washer
H
on each of 2 Bolts
G
. Align the panels as
shown. Insert the Bolts with Washers through the
eyelets in the underside of the Seat Panel and into
the holes at the bottom of the front of the Backrest.
Tighten using the Hex Wrench, but do not over-tighten.
Hardware Used:
G
Bolt (M6x40)
x2
H
Washer
x
2
A
B
G
H
2
Attach the Left and Right Panels
C
/
D
to the
assembled seat: Place a Washer
G
on each of 6
Bolts
F
. Align the eyelets on the Left Panel with the
holes in the edge of the Seat Panel as shown, then
insert a Bolt with Washer into each of the 3 aligned
sets of eyelets (1 behind the front panel of the seat,
2 along the side of the seat). Gently tighten using
Hex Wrench without fully tightening. Repeat to
attach the Right Panel.
Hardware Used:
G
Bolt (M6x40)
x
6
H
Washer
x
6
D
C
G+H
3
Secure the Side Panels to the Backrest
B
. Place a
Washer
H
on each of 4 Bolts
G
. Insert a Bolt with
Washer through each of the 4 aligned sets of eyelets.
hardware used:
G
Bolt (M6x40) x4
H
Washer x4
R1
R1
R1
R1
G+H G+H
B
A
CD
H
G