Ashville Chat Set Item#: 63742 ATTACH YOUR RECEIPT HERE Keep a copy of your proof of purchase or order confirmation which will be needed if you need to contact us about warranty coverage. Save these instructions for future reference. Purchase Date: Questions, problems, missing parts? Before returning to your retailer, our Florida-based customer service team is available: Call toll-free Email Live chat (866) 866) 985-7877 cservice@welltraveled.net www.balkenehome.com 9 a.m. – 9 p.m., EST 9 a.m. – 6 p.
INFORMATION BEFORE YOU BEGIN Before beginning assembly, make sure all parts are present. Compare parts received with the parts list. If any part is missing or damaged, do NOT attempt to assemble the product. Please read and understand this entire manual before attempting to assemble, operate or install this product. If you have any questions regarding the product, please contact Customer Service. GENERAL INFORMATION Your new patio set is made from the finest materials available.
PACKAGE CONTENTS: CHAIRS A B QuanTiTY PART DESCRIPTION A Seat Panel 1 B Backrest 1 C Left Panel* 1 D Right Panel* 1 E Seat Cushion 1 (per chair) *When facing the front of the chair CON C D (per chair) G H M6x40 Bolt Qty: 11 Washer Qty: 11 Hex Wrench E Assemble in a clear area on a spacious, nonabrasive surface such as a carpet or blanket. Wait to fully tighten hardware until final step. Do not over-tighten hardware. Contact us for assistance: (866) 985-7877 | www.
ASSEMBLY: CHAIRS 1 Locate the Backrest B and Seat Panel A. Place a Washer G on a Bolt F. Align the panels as shown. Insert the Bolt with Washer through the eyelet in the underside of the Seat Panel and into the hole in the middle of the bottom of the Backrest. A B F Tighten using the Hex Wrench, but do not over-tighten. hardware used: 2 F Bolt (M6x40) x1 G Washer x1 Attach the Left and Right Panels C/D to the assembled seat: Place a Washer G on each of 6 Bolts F.
ASSEMBLY: CHAIRS 4 Turn assembled chair upright on a flat, level surface to ensure that it sits squarely and level on the ground. Adjust fastenings if needed, then firmly tighten all Bolts installed in Steps 1-3. E Place the Seat Cushion E in the seat. Repeat Steps 1-4 to assemble second chair. Your Ashville Chairs are fully assembled! Contact us for assistance: (866) 985-7877 | www.balkenehome.
PACKAGE CONTENTS: SOFA BENCH A B ParT DEScriPTion QUANTITY A Seat Panel 1 B Backrest 1 C Left Panel* 1 D Right Panel* 1 E Seat Cushion 1 *When facing the front of the sofa HARDWARE CONTENTS C D G H M6x40 Bolt Qty: 12 Washer Qty: 12 Hex Wrench E Assemble in a clear area on a spacious, nonabrasive surface such as a carpet or blanket. Wait to fully tighten hardware until final step. Do not over-tighten hardware. Contact us for assistance: (866) 985-7877 | www.balkenehome.
ASSEMBLY: SOFA BENCH 1 Locate the Backrest B and Seat Panel A. Place a Washer H on each of 2 Bolts G. Align the panels as shown. Insert the Bolts with Washers through the eyelets in the underside of the Seat Panel and into the holes at the bottom of the front of the Backrest. Tighten using the Hex Wrench, but do not over-tighten. A hardware used: B G Bolt (M6x40) x2 H Washer x2 G H 2 Attach the Left and Right Panels C/D to the assembled seat: Place a Washer G on each of 6 Bolts F.
ASSEMBLY: SOFA BENCH 4 Place assembled sofa upright on a flat, level surface to ensure that it sits squarely and level on the ground. Adjust fastenings if needed, then firmly tighten all Bolts. E Place the Seat Cushion E in the seat. Your Ashville Sofa is fully assembled! Contact us for assistance: (866) 985-7877 | www.balkenehome.
PACKAGE CONTENTS: TABLE A PART DESCRIPTION QUANTITY A Table Frame 1 B Shelf 1 C Leg 4 D Glass Tabletop 1 B HARDWARE CONTENTS C E F M6x20 Bolt Qty: 12 Washer Qty: 12 Hex Wrench D Assemble in a clear area on a spacious, nonabrasive surface such as a carpet or blanket. Wait to fully tighten hardware until final step. Do not over-tighten hardware. Contact us for assistance: (866) 985-7877 | www.balkenehome.
ASSEMBLY: TABLE 1 C Place the Table Frame B upside-down on a protected surface (Bolt holes will be visible near each corner). Place E a Washer F on each of 8 Bolts E. x8 F Position a Leg C at the corner of the Table Frame as shown, aligning the eyelets in the top plate of the Leg with the holes in the Table Frame. Insert a Bolt with Washer into each of the the aligned sets of eyelets. C A Repeat to install remaining 3 Legs. Tighten Bolts with the Hex Key, but do not over-tighten.
LIMITED WARRANTY Customers in the Contiguous US With proof of purchase from an authorized retailer, this product is warranted for a period of 1 year from original purchase date against defects in materials and workmanship under normal use. This warranty does NOT cover normal wear/weathering, exposure to water, freezing temperatures, oils, fluids, or chemicals OR use in a commercial context if the unit is not designated as a commercial model.
