Use and Care Manual

Contact us for assistance: [phone] | www.wtliving.com 4
1
2
PrEParaTion
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday,
9 a.m. - 6 p.m. EST or email at [e-mail].
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 60 Minutes | DO NOT over tighten hardware!
aSSEMBLY
CHAIR ASSEMBLY
1
Attach the Chair Back
D
to the Seat
E
by inserting the
pre-installed studs at the base of the Chair Back into the holes
on the Seat. Secure with a Washers/Spring Washers/Nuts
H
(in
that order) on each stud.
Hardware Used:
H
8mm Washer/Spring Washer/Nut x2
2
Turn the seat upside-down. Attach the Chair Legs
F
to the
Seat
E
by inserting the pre-installed studs on the bottom of the Seat into
the holes at the top of each Chair Leg. (HINT: Begin with REAR legs, then
attach FRONT legs.)
Secure each Leg with 2 sets of Washers/Spring
Washers/Nuts H (in that order). DO NOT OVERTIGHTEN.
Hardware Used:
H
8mm Washer/Spring Washer/Nut x8