Use and Care Manual

Contact us for assistance: [phone] | www.balkenehome.com 4
PrEParaTion
1
2
ASSEMBLY – CHAIRS
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing, please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 9 p.m., EST or by email at
[e-mail].
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 60 Minutes | DO NOT over tighten hardware!
1
Fit the Backrest D to the Seat E by inserting the
prefixed studs into the two holes on the seat. Bolt
together using Washers/Spring Washers/Nuts H. Tighten
the Nut using the Wrench K.
Repeat with second chair.
Hardware Used: H Washer/Spring Washer/
Nut 8mm x4
2
E
Turn the unit upside-down. Fix the Chair Legs F to the
Seat by fitting the prefixed studs into the holes in
the top of the Legs. Bolt together using Washers/Spring
Washers/Nuts
H. Tighten each Nut using the Wrench K.
Repeat with second chair.
Hardware Used: H
Washer/Spring Washer/
Nut 8mm x16