Manualshelf

Installation Sheet

ManualsBrandsBaldwin ManualsHardwareL029 Style Passage Door Lever Set with choice of Small Rosette from the Estate Collection
12
PK.1036 Rev 01(4/17)©2017 Spectrum Brands, Inc.
Backplate Installation Process
1. Use instructions and template to install latch.
2. Insert the spindle into the latch.
3. Position the backplates over the spindles and
insert the alignment bushings into the backplates.
4. For dummy installations level the bottom edge.
5. With the spindle square to the door surface,
mark and drill pilot holes (5/64” softwood /
3/32” hardwood).
6. Install mounting screws into backplates.
7. Remove the alignment bushings and discard.
8. Attach roses to backplates and install knobs or
levers.
ALIGNMENT
BUSHING
LATCH
ALIGNMENT
BUSHING
(INSTALLED)
SPINDLE
BACKPLATE
MOUNTING
SCREW
BACKPLATE
MOUNTING
SCREW
ese instructions MUST be used for all rosettes with diameters less
than 2.5˝ and a door thickness of 1-3/8˝ to 1-3/4˝ with a 5/8˝ face bore.
Installing Passage Locks with Small Rosettes