Manualshelf

Installation Sheet

ManualsBrandsBaldwin ManualsHardwareL029 Style Passage Door Lever Set with choice of Medium Rosette from the Estate Collection
12
PK.1036 Rev 01(4/17)©2017 Spectrum Brands, Inc.
Adapter Installation Process
1. Use instructions and template to install latch.
2. Position the adapters so the #10 machine
screws are inserted from the inside face of the
door.
3. Loosely thread the #10 machine screws
through the inside adapter into the outside
adapter.
4. Insert the spindle into the latch.
5. Insert the alignment bushings into both
adapters.
6. Fully tighten the #10 machine screws.
7. Remove the alignment bushings and discard.
8. Attach roses to adapters and install knobs or
levers.
ALIGNMENT
BUSHING
LATCH
OUTSIDE
ADAPTER
INSIDE
ADAPTER
ALIGNMENT
BUSHING
(INSTALLED)
SPINDLE
#10 MACHINE SCREWS
ese instructions may be used for rosettes with diameters greater than
2.5˝ and a door thickness of 1-3/8˝ to 1-3/4˝ with a 2-1/8˝ face bore.
Installing Passage or Privacy Locks with Large Rosettes