Hardwood Engineered CHE - Installation & Maintenance

1. Align the front legs (#3) to the
pre-drilled holes located on the
front corners of the seat (#2).
2. Prepare 4 bolt assemblies by
first inserting a lock washer
(#B) onto the bolt (#C) then
a flat washer (#A) onto that
same bolt (#C), in that order.
Insert into the front corner
holes and secure using the
Allen wrench (#E).
Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does
not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.
ASSEMBLY IS COMPLETED