Hardwood Engineered CHE - Installation & Maintenance

#C x 2pcs

1. Carefully place the backrest w/legs (#1) onto a protected surface.

2. Align the pre-drilled holes on the back side of the seat (#2) to the

pre-drilled holes along the front of the backrest w/legs (#1)

3. Prepare 2 bolt assemblies

by first inserting a lock

washer (#B) onto the bolt

(#C) then a flat washer

(#A) onto that same bolt

(#C), in that order. Insert

into the 2 center holes

and secure using the

Allen wrench (#E).

Prepare 4 bolt assemblies by first

inserting a lock washer (#B) onto

the bolt (#D) then a flat washer (#A)

onto that same bolt (#D), in that order.

Insert prepared bolt assemblies into

the back corner holes and secure

using the Allen wrench (#E).

Insert wood dowel (#F) to the middle hole of the seat cushion (#2).