Installation Guide 1

ManualsBrandsBaldwin ManualsDeadboltsTraditional Single Cylinder Deadbolt for 1-5/8" Bore Hole

1-5/8” Deadbolt Preparation

PK-1092-T (8/00)

1-5/8” Collar

Auxiliary Deadbolt

Installation Instructions

PK-1092-T (8/00)

©Baldwin Hardware Corporation

P.O. Box 15048 Reading, PA 19612

b. Place turnpiece mounting plate on

inside of door as shown. Attach cylinder

using two #10-32 x 1-7/8" pan head

machine screws. Insert screws through

mounting plate, deadbolt, screw guide

and collar into the cylinder. Tighten all

screws. (fig. 2)

Installing Deadbolt

Single Cylinder Assembly

Double Cylinder Assembly

a. Extend deadbolt using flathead screw-

driver. Keeping tailpiece vertical, insert

cylinder through collar and screw guide

into deadbolt. The arrow on the screw

guide must be on the outside and point-

ing up. Hold in place. Do not insert key

during this procedure. (fig. 1)

b. Insert deadbolt. Install with two #8 x 3/4" flat

head combination screws provided (see diagram

for proper positioning). Ensure deadbolt head is

extended throughout installation procedure.

a.The deadbolt sup-

plied with this unit

has an adjustable

backset feature. It will

be set at 2-3/8" back-

set. To adjust to

2-3/4" backset, grasp

body and twist face-

plate/bolthead assembly 180° until it stops.

Unit is now ready for installation in a 2-3/4"

backset configuration.

a. Carefully break off cylinder

tailpiece at required mark for

your door thickness.

Caution; use two pairs of

pliers as shown or tail-

piece will be damaged.

b. Align tailpiece with

slot. Keep tailpiece verti-

cal and curved toward

right side of the hole as

illustrated.

c. Place turnpiece trim over mounting plate. Insert tailpiece

into turn piece. Attach trim to mounting plate with two #8-32

x 5/8" oval head machine screws. Tighten screws. (fig 3)

a. Extend deadbolt

using flathead

screwdriver.

Keeping tailpiece

vertical and

toward the right

side of hole, insert

outside cylinder

through collar and

into the deadbolt.

Align slot of inside cylinder with notch in threaded collar.

Keeping tailpiece vertical and curved toward the right side of

hole, insert inside cylinder with threaded collar into the dead-

bolt. Attach cylinders using two #10-32 x 2-1/4" flat head

machine screws. Tighten screws. Do not insert key during this

procedure. (fig.4)

b. Align cylinder cover

over inside cylinder.

Screw on decorative

cylinder collar.

Congratulations! Your

installation is now

complete!

Collar

Cylinder

Extended deadbolt

Tailpiece

1-3/4"

2-1/4"

Tailpiece

OUTSIDE

Mounting plate

INSIDE

Mounting plate

Turnpiece trim

fig. 3

Cylinder collar

Cylinder

cover

Inside Cylinder

Install deadbolt with both long

slots on latch body in upper

position.

Cylinder

Slot

Remember Baldwin

With the completion of your

project, remember that

Baldwin quality hardware

and giftware products are

available for all your deco-

rating and remodeling

needs. Matching knob and

leversets for interior doors,

beautiful bath accessories,

and a complete selection of

cabinet and door enhancing

hardware are all available

from your Baldwin retailer.

With your purchase of The Images Collection solid brass deadbolt, you’re

among a group of discerning individuals who know the intrinsic value of

selecting the finest – Baldwin.

Images entrance locksets, interior latchsets, and deadbolts coordinate beautifully,

enabling you to carry a specific design theme throughout your home.

Our step-by-step installation instructions will help guide you through your

project quickly and easily.

Before you begin your installation, read and understand the

installation instructions and marking templates. If you have any

questions, please do not hesitate to contact our Baldwin Technical Services

Department, 1-800-566-1986

. We’re here to help!

NOTE: Failure to use all recommended components will void Grade 1 rating.

We thank you for your Baldwin purchase and wish you the fullest

enjoyment of your Baldwin Handleset.

Technical Services Support

1-800-566-1986

Hours: 6 am to Midnight C.S.T.-7days a week.

(fig. 1)

(fig. 2)

Congratulations!

fig. 4

Outside Cylinder

Inside

Cylinder

Threaded

collar

Extended

deadbolt

Collar

OUTSIDE

TEAR HERE FOR ENGLISH. TEAR HERE FOR ENGLISH.

BHMA

Screw

guide

Screw

guide