Specification Sheet

7
2.75″ (70mm) Backset Mortise Locks
2.75″ Backset Mortise Lock
Residential Entrance
Latch bolt by thumb latch outside and knob inside, except when thumb latch
is locked by stop in front; then latch bolt by key outside and knob inside.
Dead bolt by key outside and turn knob inside. Continuous turn of key outside
retracts both latch and dead bolt.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3 lbs. (1.36 kg)
Federal Specification Equivalent: Government Type: 122A
NOTE: May be used in single and double cylinder applications.
Residential Entrance—Emergency Egress
Latch bolt by thumb latch outside and knob inside, except when thumb latch
is locked by stop in front; then latch bolt by key outside and knob inside. Dead
bolt by key outside and turn knob inside. When dead bolt is thrown, stop is
automatically activated making outside thumb latch rigid. Inside knob retracts
latch and dead bolt simultaneously but DOES NOT free outside thumb latch.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3 lbs. (1.36kg)
NOTE: Not recommended for double cylinder applications.
No. 6020 Knob Function
No. 6020-LS Lever Function
No. 6021 Knob Function
No. 6021-LS Lever Function
Passage
Latch bolt by knob either side.
Weight: 2.6 lbs. (1.18kg)
Federal Specification Equivalents: ANSI Series: 1000-F01
No. 6110 Knob Function
No. 6110-LS Lever Function
Entrance and Storeroom
Latch bolt by knob either side. Deadbolt by key outside and
turn piece inside.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3 lbs. (1.36kg)
Federal Specification Equivalents: ANSI Series: 1000-F21
NOTE: for single and double cylinder applications.
No. 6010 Knob Function
No. 6010-LS Lever Function