Specification Sheet

5
2.5″ Backset Mortise Lock
2.5″ (64mm) Backset Mortise Locks
Residential Entrance
Latch bolt by thumb latch outside and knob inside, except when thumb latch
is locked by stop in front; then latch bolt by key outside and
knob inside. Dead bolt by key outside and turn knob inside. Continuous turn
of key outside retracts both latch and dead bolt.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3 lbs. (1.36kg)
NOTE: May be used in single and double cylinder applications.
Residential Entrance—Emergency Egress
Latch bolt by thumb latch outside and knob inside, except when thumb latch
is locked by stop in front; then latch bolt by key outside and knob inside.
Dead bolt by key outside and turn knob inside. When dead bolt is thrown,
stop is automatically activated making outside thumb latch rigid. Inside knob
retracts latch and dead bolt simultaneously but DOES NOT free outside thumb
latch.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3 lbs. (1.36kg)
NOTE: Lock function is not reversible – specify hand.
Not recommended for double cylinder applications.
No. 6320 Knob Function
No. 6320-LS Lever Function
No. 6321 Knob Function
No. 6321-LS Lever Function
Entrance
Latch bolt by thumb piece from either side, except when outside thumb
piece is locked by stop in front; then latch bolt by key either side and thumb
piece inside. Dead bolt by key either side, continuous turn of key retracts
both latch and dead bolt.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3.3 lbs. (1.50kg)
NOTE: To order and price complete trim sets, order two sets of exterior
handle trim in “BBXX” configuration. Baldwin turn piece cylinder 844X.
XXX may be used for interior.
No. 6325
Entrance and Apartment
Latch bolt by knob from either side, except when outside knob is locked by
stop in front; then latch bolt by key outside and knob inside. Dead bolt by key
outside and turn piece inside. Continuous turn of key outside retracts both
latch and dead bolt.
1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment.
When extended, dead bolt deadlocks latch bolt.
Weight: 3 lbs. (1.36kg)
NOTE: May be used in single and double cylinder applications.
No. 6301 Knob Function
No. 6301-LS Lever Function