Specification Sheet
17
Tubular Strike Specifications
Tubular Latch Strikes
Standard Box Strike
Size: .062″ × 1.125″ × 2.75″ (2 × 29 × 70mm)
Lip-to-Center Dimension: 1.312″ (33mm). Other Lip-to-Center lengths are available at an
additional charge. Maximum Lip-to-center available is 3.438″ (87mm).
Dust Box: Box is furnished unattached; conceals installation marks and cutouts. (No.
5510.000)
Fasteners: Screws included.
Template: Metal frames to be prepared in accordance with ANSI standard A115.2.
Extended Lip Box Strike
Size: .062″ × 1.25″ × 2.75″ (2 × 29 × 70mm)
Lip-to-Center Dimension: No. 5510.XXX.E158 1.625″ (41mm)
Lip-to-Center Dimension: No. 5510.XXX.E178 1.875″ (48mm)
Lip-to-Center Dimension: No. 5510.XXX.E214 2.25″ (57mm)
Dust Box: Box is furnished unattached; conceals installation marks and cutouts. (No.
5510.000)
Fasteners: Screws included.
Calculated Dimension: Lip-to-Center length must be calculated by the following
formula: Door thickness ÷ 2 + .375″ (10mm) = Lip-to-Center length. Round to closest size.
No. 5510.XXX.TSTR
5510.XXX.E158
5510.XXX.E178
5510.XXX.E214
Product Latch Strike Preparation Lip-to-Center Length
Number Width Description 1.625″ 1.875″ 2.25″
5510 .5″ LatchandDeadbolt • • •