Manualshelf

Specification Sheet

ManualsBrandsBaldwin ManualsHardwareRight Handed Emergency Egress Mortise Lock Body for Knobs with 2-3/4 Inch Backset
11121314151617181920
13
Mortise Strike Specifications
Mortise Strikes
Standard Latch—Deadbolt Function
Size: Base: 1.25″ × 4.875″ (32 × 124mm) × 1.25″ (32mm) Lip-to-Center
Thickness: .093″ (2.3mm), brass material.
Screws: Furnished with No. 12 combination wood/machine screws, finished to match.
Template: Designed to fit metal/wood frames prepared in accordance to ANSI A115.1/
A115.11.
Features: Furnished flat with rounded lip edges for universal use with left and right handed
locks. Supplied standard with all locks incorporating an anti-friction latch bolt.
Curved Lip: Available with a curved lip at no additional charge. Supplied standard with all
locks incorporating a solid-type latch bolt. Always specify hand of door. Example: 6340.
XXX.R. Please see ordering instructions in this section.
Important: No. 6040 – for use with locks incorporating a .625″ (16mm) wide latch bolt (6000
Series). No. 6340 – for use with locks incorporating a .5″ (13mm) wide latch bolt. (6300
Series and 6800 Series locks).
Extended Lip Strikes
Size: 1.25″ × 4.875″ (32 × 124mm) × Specified Lip-to-Center.
Thickness: .093″ (2.3mm), brass material.
Screws: Furnished with No. 12 combination wood/machine screws, finished to match.
Template: Designed to fit metal/wood frames prepared in accordance to ANSI A115.1/
A115.11.
Features: Designed for use with locks installed on special door and frame conditions.
Supplied with a curved lip only. Always specify hand of door and required length.
Dimensions: Available in the following Lip-to-Center lengths only: 1.625″ (41mm); 1.875″
(48mm); 2.25″ (57mm); 3″ (76mm).
Calculated Dimension: Lip-to-Center length must be calculated by the following formula: Door
thickness ÷ 2 + .375″ (10mm) = Lip-to-Center length. Round to closest size.
HANDED
No. 6039 = 2
3
⁄
4
backset
No. 6339 = 2
1
⁄
2
backset
No. 6040 = 2
3
⁄
4
backset
No. 6340 = 2
1
⁄
2
backset
Product Latch Strike Preparation Lip-to-Center Length
Number Width Description 1.625″ 1.875″ 2.25″ 3.0″
6039 .625″ LatchandDeadbolt • • • •
6339 .5″ LatchandDeadbolt • • • •