Manualshelf

Specification Sheet

ManualsBrandsBaldwin ManualsHardwareRight Handed Emergency Egress Mortise Lock Body for Knobs with 2-3/4 Inch Backset
11121314151617181920
11
Armored Fronts
Armored Front Specifications
Armored Front— 1.25″ (32mm)
Armored Front— 1.25″ (32mm)
Features: Removable armored fronts protect the lock against tampering of the
cylinder yoke assembly. Available in all matching finishes of mortise locks.
Ordering Instructions: Specify part number indicated below and
finish required.
Important: Fronts for use on 6000 Series Locks with 1.25″ (32mm) wide front and
.625″ (16mm) wide latch bolt only.
Features: Removable armored fronts protect the lock against tampering of the
cylinder yoke assembly. Available in all matching finishes of mortise locks.
Ordering Instructions: Specify part number indicated below and
finish required.
Important: Fronts for use on 6800–6802 Series Locks (1.5″ and 2″ backset) Locks
with a 1.25″ (32mm) wide front and .5″ (13mm) wide latch bolt.
6000 Series
6800 Series
Armored Front— 1.25″ (32mm)
Features: Removable armored fronts protect the lock against tampering of the
cylinder yoke assembly. Available in all matching finishes of mortise locks.
Ordering Instructions: Specify part number indicated below and
finish required.
Important: Fronts for use on 6300 Series Locks (2.5″ backset only) with a 1.25″
(32mm) wide front and .5″ (13mm) wide latch bolt.
Part No. Function
6301.XXX.0004 Latch/Dead Bolt/Stops
6310.XXX.0004 Latch/Dead Bolt
6318.XXX.0004 Latch
XXX - Insert Finish
6300 Series