Specification Sheet

3
Exterior Mortise Locks
Exterior Mortise Locks
Lock Specifications
Construction: Refer to Section h of this catalog.
Backsets: Available 2.5″ (64mm)–2.75″ (70mm) for knobs and
levers. Contact customer service for special applications.
Keying: All levels of keying including construction keying are
available. Refer to Section k of this catalog. Contact customer
service for special applications.
Strike: Base metal of Brass and finished to match. Supplied
to ANSI standard A115.1, 1.25″ (32mm) lip-to-center. Locks
furnished standard with straight lip strike (Universal) and dust
box. Curved lip and special length strikes available. All keyed
lock functions are furnished standard with a high grade steel
security strike and two 3″ steel screws.
Rabbeted Strike: Available for .5″ (13mm) rabbet only on
rabbeted door conditions.
Template: Metal doors/frames to be prepared in accordance with
ANSI A115.1 or A115.11. Face cutouts are subject to variation.
always review trim requirements before door preparation.
Federal Specification: Conforms to Federal Specification
FF-H-106 Series 86/87 and to all Performance and Structural
Specifications of ANSI A156.13, Series 1000, Grade 1 and/or
Grade 3.
Door Thickness: 1.75″ (44mm) thick is standard. For other door
thicknesses, specify size.
Standards of Excellence
• Conforms to Federal Specification FF-H-106 Series 86/87
and to all Performance and Structural Specifications of ANSI
A156.13 Series 1000, Grade 1 and/or Grade 3.
• Most working parts are manufactured of solid forged-brass
material, precisely machined for maximum strength and
smooth, lifetime operation. (Forgings have a 250% greater
tensile strength over castings.)
• All lock cases are constructed of heavy-gauge steel
(.093″/2.4mm material) and plated with a protective rustproof
coating to retard oxidation.
• Most lock functions are completely reversible within the field
to facilitate installation.
• All locks and strikes are designed to fit standard preparation
ANSI A115.1 or A115.11. Locks have adjustable forged-brass
lock fronts, protected by armored scalp fronts for ultimate
strength and protection against tampering.
• All keyed lock functions illustrated within this section are
furnished with a specially-designed security strike constructed
of high-grade steel for ultimate strength and durability. The
security strike is mortised into the wood jamb and anchored
to the structural components of the
opening with two 3″ steel screws and covered with a finished
strike to conceal the fasteners.
• All deadbolts are of forged-brass construction with
1″ (25mm) throw when extended (2.5″ and 2.75″ backset
locks) and two (hardened) steel inserts for maximum
protection and security.
• 2.5″ and 2.75″ backset locks are furnished standard with
an anti-friction latch bolt of .75″ (19mm) throw and 1.25″
(32mm) wide front. Only 2.5″ (64mm) backset locks are
available with 1″ (25mm) wide front and solid latch bolt for
narrow door conditions.
• All keys are designed with a 1.25″ (32mm) wide bow surface
to facilitate use by the disabled and physically-handicapped
people.
• Our Design Department works closely with a number
of America’s most prestigious museums and historical
foundations. Baldwin is renowned for meeting the stringent
demands for quality and authenticity in the restoration/
retrofit/rehabilitation markets.
• Numerous patents, copyrights, and trademarks are held by
the Corporation to protect the integrity and reputation of our
distinctive line of hardware appointments.